This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.  Precut kit with step by step installation instructions.  International comes in length with hose cutter and step by step installation instructions.   Note:   For vacuum lines only does not include main air intake or coolant lines shown in picture

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.   Precut kit with step by step installation instructions.  International comes in length with hose cutter and step by step installation instructions.  Note:  For vacuum lines only does not include main air intake or coolant lines shown in picture

each kit

Rated to 100 psi!

each kit

Leaking power steering lines ruin the paint on the driver's side of the engine bay allowing the body to rust. I strongly suggest replacing these lines.  This kit replaces the hoses to and from the cooler and from the rack to the reservoir. The hose is very high quality (rated to carry almost any automotive fluid at 300 psi !) and is almost identical in appearance to the OEM hose. We include "Protector" stainless steel clamps. These clamps don't have the hose damaging serrated edges most cheaper clamps have. Precut kit with step by step installation instructions.   Note: This kit does not include the hose from the pump to the rack as that one is still available from the normal Alfa parts suppliers.    

each kit

A Blown hose anywhere in the coolant system can leave you stranded!  If your car still has its original coolant hoses it's probably time to change them. Our coolant bottle hose kit includes five hoses. It includes three silicone hoses that attach to the bottle, and one silicone hose to connect the left head to the "T" junction by the firewall. This hose is often forgotten and is super critical. The kit also includes one high quality non silicone hose to connect the bottom of the bottle to the junction up by the radiator.   Precut kit with step by step installation instructions.   Note:  Does not include coolant bottle.

each kit

	Air flow meter (3 years old)  $300
	L-jetronic wiring harness $50
	Distributor, Cap, spark plug wire $100
	Ignition ECU $150
	Throttle Switch $25
	Altitude Sensor $80 (also fits 86 GTV6 & Spider 85-89)
	Combi Relay $35
	Starting Injector (start valve) $85
	Base and amplifier $35
	Bosche ECU fuel (rev limited removed) $300
	6 stage 1 fuel injectors (4 years old like new) $289
	Hi Performance Store Air intake system for stock AFM w/ blue powder coated air filter and yellow silicone (less bracket) $250.00

Hi Performance Store, Inc. Sapulpa, OK 74066