With over 33 feet of silicone hose this is the kit first generation Integra owners have been waiting for. This kit replaces every vacuum hose under the hood, and various small diameter coolant hoses. It is by far the most complete kit on the market for these cars, and it uses the highest quality pure silicone hose. Because this kit comes in length with a hose cutter it fits both "Brown Top" and "Black Top" Integra motors, as well as highly modified NA and forced induction engines.

each kit

The picture does not do this kit justice because many of the hoses are  under the air box, behind the engine, and are hidden from view. This kit replace all the vacuum hoses associated with the fuel injection and the cruise control systems. It also replaces all the smaller diameter hoses that attach to the coolant bottle as well as the throttle body and all hoses for the windshield washer system. It also replaces three of the hoses for the air oil separator.  This is a precut kit with step by step installation instructions.  Note:   The passenger side hose off of the air oil separator is not included but is still available from OEM suppliers at reasonable prices. The same is true of the hose that attaches to the bottom of the coolant bottle.

each kit

Rated to 100 psi

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.  Has over 17 feet of silicone in 4 different sizes.  Precut kit with step by step installation instructions. International  comes in length with hose cutter and step by step installation instructions.   Note:  For vacuum lines only (pictured in yellow) does not include main air intake  or coolant lines shown in picture

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.  Has over 18 feet of silicone in 4 different sizes.  Precut kit with step by step installation instructions.   International comes in length with hose cutter and step by step installation instructions.

each kit

Rated to 100 psi!

each kit

A Blown hose anywhere in the coolant system can leave you stranded!  If your car still has its original coolant hoses it's probably time to change them. Our coolant bottle hose kit includes five hoses. It includes three silicone hoses that attach to the bottle, and one silicone hose to connect the left head to the "T" junction by the firewall. This hose is often forgotten and is super critical. The kit also includes one high quality non silicone hose to connect the bottom of the bottle to the junction up by the radiator.   Precut kit with step by step installation instructions.  Note:  Does not include coolant bottle.

each kit

     If you smell fuel in your car, the problem is most likely related to the components above the fuel tank. This kit has all 8 hoses (7 are silicone, and one is a braided fuel hose) as well as good instructions for testing the system while you have it apart. I highly recommend this kit. It's no fun to smell fuel vapors while you drive.   Precut kit with step by step installation instructions.

each kit

     If you smell fuel in your car, the problem is most likely related to the components above the fuel tank. This kit has all 5 hoses (4 are silicone, and one is a braided fuel hose) as well as good instructions for testing the system while you have it apart. I highly recommend this kit. It's no fun to smell fuel vapors while you drive.   Precut kit with step by step installation instructions.

each kit

     This pre-cut kit replaces all the fuel lines under the hood.  It includes:  hoses for each kit fuel injectors; upper and lower fuel injector seals; the line from the fuel pressure regulator; the line from the fuel rail; and 14 new fuel clamps.  It's a direct replacement kit. This is a pre-cut kit and it includes detailed step-by-step written installation instructions.  As with all our kits, the hoses are high quality, sized correctly and rated for the appropriate pressures involved.     

each kit

     This pre-cut kit replaces all the fuel lines under the hood.  It includes:  hoses for each kit fuel injectors; the line from the fuel pressure regulator; the line from the fuel rail; and 14 new fuel clamps.  It's a direct replacement kit. This is a pre-cut kit and it includes detailed step-by-step written installation instructions.  As with all our kits, the hoses are high quality, sized correctly and rated for the appropriate pressures involved.    

each kit

This is a pre-cut kit and it includes detailed step-by-step written installation instructions.  As with all our kits, the hoses are high quality, sized correctly and rated for the appropriate pressures involved.   

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.  Precut kit with step by step installation instructions.  International comes in length with hose cutter and step by step installation instructions.   Note:   For vacuum lines only does not include main air intake or coolant lines shown in picture

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.   Has over 24 feet of hose in 5 different sizes.  Precut kit with step by step installation instructions.  International comes in length with hose cutter and step by step installation instructions.  Note:  For vacuum lines only does not include main air intake or coolant lines shown in picture

each kit

Rated to 100 psi!

each kit

Leaking power steering lines ruin the paint on the driver's side of the engine bay allowing the body to rust. I strongly suggest replacing these lines.  This kit replaces the hoses to and from the cooler and from the rack to the reservoir. The hose is very high quality (rated to carry almost any automotive fluid at 300 psi !) and is almost identical in appearance to the OEM hose. We include "Protector" stainless steel clamps. These clamps don't have the hose damaging serrated edges most cheaper clamps have. Precut kit with step by step installation instructions.   Note: This kit does not include the hose from the pump to the rack as that one is still available from the normal Alfa parts suppliers.    

each kit

A Blown hose anywhere in the coolant system can leave you stranded!  If your car still has its original coolant hoses it's probably time to change them. Our coolant bottle hose kit includes five hoses. It includes three silicone hoses that attach to the bottle, and one silicone hose to connect the left head to the "T" junction by the firewall. This hose is often forgotten and is super critical. The kit also includes one high quality non silicone hose to connect the bottom of the bottle to the junction up by the radiator.   Precut kit with step by step installation instructions.   Note:  Does not include coolant bottle.

each kit

This kit replaces all the vacuum lines (air hoses) associated with the fuel injection.  Has over 23 feet of hose in 5 different sizes.  This kit comes in length with a hose cutter, installation instructions, and vacuum hose diagrams. 

each kit

Rated to 100 psi

each kit

The Alfa Spider has a unique air oil separation system that flows a lot of hot oil back to the oil pan. Because of this we don't want to use silicone for these hoses. This kit uses black high pressure hose specifically made to handle petroleum products. It's covered with a nice braided fabric that looks a lot like the factory hose. Clamps are included. Precut kit with step by step installation instructions.

each kit

We now have a trunk line kit.  It consists of silicone vapor lines and braided fabric covered 300 psi fuel line. If you smell fuel in the car, odds are it's a leak in the vapor system in the trunk. Replace those hoses right away. The second photo shows the braided hoses included in the trunk kit. We use 300 psi fuel hose here! It's fabric covered so it looks OEM but allows use of high pressure pumps and regulators for highly modified cars.   Precut kit with step by step installation instructions.

each kit

     This kit replaces all the vacuum hoses associated with the Spica system and the four hoses for the windshield washer system. All of the red hoses you see in the picture are included with the exception of the radiator overflow hose. That's in the kit listed below.  The kit comes in length with a hose cutter

each kit

The Alfa Spider has a unique air oil separation system that flows a lot of hot oil back to the oil pan. Because of this we don't want to use silicone for these hoses. This kit uses black high pressure hose specifically made to handle petroleum products. It's covered with a nice braided fabric that looks a lot like factory hose. Clamps are included.  This kit includes hoses for some other systems. It has conventional hoses for the air pump (smog pump) and a black silicone hose for the radiator overflow.  Precut kit with step by step installation instructions. 

each kit

Rated to 100 psi

each kit

each kit

    This kit replaces the vacuum hoses under the hood, all the windshield washer hoses, and various small diameter coolant hoses. It includes the large hose for the idle control valve, as well as the large heater hose between the engine and firewall. It does not include the 90deg fitting from the manifold to the IAC device. This is a very good kit that will help restore lost power, fuel economy and emission characteristics to your BMW.

each kit

    This kit fits all E30s with the M42 (16valve) engine. It includes five sizes of silicone hose and replaces all the vacuum hoses under the hood including the large hoses for the IAC, as well as various small diameter coolant hoses and all the windshield washer hoses. (it does not include the rubber "Y" connectors under the intake manifold). This is an excellent kit that will help restore life into your M42 powered E30.

each kit

each kit

each kit

     The E30 325i kit replaces all the vacuum lines under the hood, the windshield washer hoses, and the four small diameter coolant lines that connect to the throttle body and coolant reservior. This kit is pre-cut with easy to follow step by step instructions. The kit includes four different sizes of silicone.

each kit

     This kit replaces all the underhood vacuum hoses, windshield washer hoses and various small diameter coolant hoses. It is not pre-cut but it comes with a hose cutter to make the job easy. This kit includes silicone hose in four different sizes.

each kit

You must call us to order this kit, it can not be ordered on line.

   The E36 325i kit replaces all underhood vacuum hoses, windshield washer hoses, and various small diameter coolant hoses. This kit includes about 21 feet of silicone hose in four different sizes.

    The E36 328i kit replaces all underhood vacuum hoses, windshield washer hoses, and various small diameter coolant hoses. This kit includes about 21 feet of silicone hose in four different sizes.

    You must call us to order this kit, it can not be ordered on line.

This kit replaces all fuel injection vacuum lines and a few coolant lines.  The kit comes in length with a hose cutter and installation instructions.

each kit

   The 533i kit replaces every vacuum hose under the hood, various small diameter coolant lines and all the windshield washer hoses. This kit comes in length with a hose cutter and installation instructions.

each kit

This kit includes all under hood vacuum lines, all windshield washer lines, and the smaller lines for the coolant bottle. It does not include the idle valve to intake plenum hose.   The 535i kit comes precut with step by step instructions with a numbered vacuum diagram. 

each kit

   This kit replaces all underhood fuel lines with high quality fuel hose. It includes correct fuel hose clamps because the original BMW clamps, while good clamps, are usually damaged during removal. The kit includes pre-cut hoses and comes with detailed step by step instructions and a numbered fuel system diagram.

each kit

     This is a pre-cut kit with 19 hoses in six different sizes. The kit replaces all the vacuum hoses under the hood, as well as a few of the smaller diameter coolant hoses. It DOES replace both hoses for the idle air control valve. This kit comes precut with step by step instructions with a vacuum diagram. 

each kit

     This kit replaces all the vacuum hoses under the hood, as well as a few of the smaller diameter coolant hoses. This kit includes a hose cutter because it is not pre-cut. It DOES replace both hoses for the idle air control valve, and comes with a vacuum diagram.

each kit

     The 633i kit replaces every vacuum hose under the hood, various small diameter coolant lines and all the windshield washer hoses. This kit comes in length with a hose cutter and installation instructions.

each kit

This kit includes all under hood vacuum lines, all windshield washer lines, and the smaller lines for the coolant bottle. It does not include the idle valve to intake plenum hose. The 635CSI kit comes in length w/ a vacuum diagram, installations instructions, and a hose cutter .

each kit

The 733i kit replaces every vacuum hose under the hood, various small diameter coolant lines and all the windshield washer hoses. This kit comes in length with a hose cutter and installation instructions.

each kit

This kit includes all under hood vacuum lines, all windshield washer lines, and the smaller lines for the coolant bottle. It does not include the idle valve to intake plenum hose. The 735i kit comes in length w/ a vacuum diagram, installations instructions, and a hose cutter .

each kit

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach kit the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged Buick is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged Buick is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

    This kit replaces all the vacuum lines under the hood as well as the long radiator overflow hose. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged Riviera is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

    This kit replaces all the vacuum lines under the hood as well as the long radiator overflow hose. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged Riviera is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

Precut kit with step by step installation instructions.  Replaces all the vacuum  lines associated with the fuel injection, windshield washer lines, and small coolant lines.

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged 3.8 is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged 3.8 is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  The kit comes in length with a hose cutter and installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

     This kit replaces all 19 flexible fuel lines on the 280ZX turbo. This includes the hoses under the hood as well as those back by the fuel tank. It  includes the hoses for the individual fuel injectors. The kit is pre-cut and has easy to follow step-by-step instructions. As with all our kits, the hoses are high quality, sized correctly and rated for the appropriate pressures involved. In some cases you can re-use your old hose clamps. However they are often corroded and unusable. If you need all new clamps, we have a kit for that below.  

each kit

    This is exactly the same kit as the one above, but it comes with new hose clamps for all the hoses. These clamps are appropriate for fuel injection hose, they don't have serrated edges that can dig into the hose and cause a fuel leak. Many of the clamps are stainless steel.

each kit

    The kit is based on a 1974 318. That year seems to have the most vacuum line due to all the efforts being made to control emissions without going to Catalytic Converters. It should have enough hose to take care of any small block Mopar.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

     This Mustang kit has enough hose to handle any stock 5.0 built from 1979 to 1995. It has the extra length often required on modified Mustangs. The car pictured is a 93' Cobra with a Vortec supercharger. It comes in length with a hose cutter and installation instructions.  

each kit

     This kit has a minimal amount of hose for race cars that no longer have most of their emissions equipment. It's intended for 1979-1995 cars although it will work fine on earlier Mustangs.  It comes in length with a hose cutter and installation instructions.

each kit

     The Mustang SVO kit replaces all the vacuum hoses under the hood, and I mean all of them. It also replaces a couple of the smaller diameter coolant hoses. Note: the engine in the picture is a Thunderbird Turbocoupe. The SVO kit is a little different. It does not include the pictured hose for the windshield washer or cruise control. It is not a pre-cut kit, but we do include a hose cutter to make the job easy. The Ford turbo 2.3 uses a lot of vacuum hose, and it controls a lot of important systems. If your car still has it's original hoses you will almost certainaly notice an improvement in engine response, idle and turbo spool up time. This kit has about 40 feet of hose in four sizes.

each kit

[up]

     This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

     The Thunderbird TC kit replaces all the vacuum hoses under the hood, and I mean all of them. It also replaces a couple of the smaller diameter coolant hoses. Note: the engine in the picture is an'87-'88 Thunderbird Turbocoupe. The eary TC kit  is a little different. It does not include the pictured hose for the windshield washer or cruise control. It is not a pre-cut kit, but we do include a hose cutter to make the job easy. Silicone hoses really help the Ford turbo 2.3. It's very sensitive to air leaks.

each kit

     This is a pre-cut kit with 32 hoses totalling about 42 feet in four sizes. It replaces every vacuum hose under the hood as well as all the windshield washer hoses. We included the hoses for the boost gauge and cruise control that are hidden under the dash and in the wheel well. Many of the TurboCoupe's systems are vacuum controled including the boost control, fuel pressure, EGR, PCV, cruise control and more. Leaks in the vacuum system can cause all sorts of problems in these cars. This kit includes step by step instructions with tech tips and pictures to help with installation.

each kit

    This kit includes two reinforced silicone couplers and four stainless steel T-Bolt clamps to attach the Turbocoupe's intercooler to the turbo and throttle body. These are far superior to the factory hoses. They help eliminate power robbing and lag causing boost leaks. We noticed a significant improvement in turbo spool up time when we installed these couplers and a new silicone vacuum kit on our '88 Turbocoupe. We guarantee these will never burst under turbo boost regardless of how much you crank up the boost with your factory turbo. They are very high quality. (note: they are slightly longer than the factory couplers. We have found that makes them easier to install and has no negative effects on performance. They can be trimmed to stock length if desired)

each kit

     This kit includes five different sizes of silicone hose. It will replace every vacuum line under the hood of this car as well as all of the windshield washer hoses. This kit does include the large diameter breather hoses attached to the valve cover etc.

each kit

     This kit replaces every single vacuum line under the hood, including the hoses Honda did a great job of hiding inside the black plastic "control box". It also replaces the radiator overflow hose.  This kit has over 31 feet of silicone hose.  The kit comes in length with a hose cutter and detailed installation instructions. This kit includes vacuum hose diagrams for all versions of the fuel injected 1984-1987 CRXs including diagrams of the hoses inside the control box.  

each kit

     This kit fits any Honda with the fuel injected 12valve 1.5 liter engine. It has over 31 feet of vacuum hose, enough to replace every single vacuum hose under the hood, even the ones hidden inside the black plastic "control box", under the intake manifold etc. It also replaces the radiator overflow hose.  The kit comes in length with a hose cutter and detailed installation instructions. This kit includes vacuum hose diagrams for the fuel injected 1984-1987 Civics including diagrams of the hoses inside the control box.  

each kit

     This kit fits all Preludes from 1988-1991. This kit has about 30 feet of hose. It replaces every single vacuum hose under the hood, including those hidden inside the "control box". It also replaces various small diameter coolant lines. The kit comes with a hose cutter to make the job easy and we include vacuum hose diagrams for the engine compartement and a seperate diagram for the control box.

each kit

     This kit is simply huge. It includes over 44 feet of silicone hose in six sizes. This kit replaces all the vacuum lines under the hood and all those in the wheel wells. It also replaces various small coolant lines. The Jag's L-Jetronic fuel injection system is very sensitive to air leaks. Eliminating those leaks with our kit will improve power, emissions, and fuel economy.

each kit

     This kit replaces all of the vacuum hoses for the fuel injection system, brake booster, crankcase ventilation, smaller diameter coolant lines for the coolant bottle, throttle body system and the HVAC hoses.  It comes in length with a hose cutter and installation instructions.

each kit

     This kit replaces all the vacuum lines associated with the fuel injection system.  It comes in length with a hose cutter and detailed installation instructions including a vacuum hose diagram.

each kit

     The Miata hose kit replaces all the hoses associated with the fuel injection system as well as various hoses for the windshield washer system, radiator overflow and more. It's a very complete kit with about 30 feet of hose.

each kit

     With 5 sizes of hose this kit will enable you to replace all your MX3's vacuum lines, windshield washer hoses and various small diameter coolant hoses.

each kit

    This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

     Ok, If you actually own one of these legendary cars, we are impressed. Our kit includes 50 feet of hose in four sizes. It's enough to replace all the windshield washer hoses and every vacuum hose under the hood. It also includes enough length to replace many of the hoses under the dash. It does not replace the cam cover breather or air slide valve hoses. The factory used a lot of short pieces of rubber hose to connect to plastic hose. This kit provides enough length to replace all the rubber and plastic. Note: some of the plastic lines pass through a rubber grommet on the driver's side firewall. We suggest enlarging the holes in the rubber grommet to allow the silicone hose to go through. As an alternative you can use short pieces of the plastic to pass through the grommet.

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

     This is a BIG kit with 46 feet of hose in five sizes. It replaces every single vacuum hose under the hood. It also replaces all the windshield washer hoses and some small diameter coolant hoses. Detailed instructions are included

each kit

     This kit has 55 feet of hose in six sizes. It's intended to cover all of the possible 240SX engine swap conversions. Whatever you come up with regarding blow off/bypass valve position, water/methanol controller location, boost controller type and location, this kit should cover it.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

Includes enough hose  for after market boost controllers and crankcase ventilation systems. We find that this is the most commonly modified car we deal with and people often need this extra kit. It comes in length with a hose cutter.

This kit replaces all vacuum lines associated with the fuel injection. This kit and has recently been improved and now includes 33 feet of hose in six sizes.  It comes in length with a hose cutter and new improved installation instructions.

each kit

This kit replaces all vacuum lines associated with the fuel injection.  It comes in length with a hose cutter and installation instructions.

each kit

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach kit the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged 3.8 is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

It comes in length with a hose cutter and installation instructions.

each kit

    This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged 3.8 is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

     This kit replaces all the vacuum lines under the hood. It also includes an extra twelve feet of hose to allow you to replace your radiator overflow and windshield washer hoses if desired. This is a pre-cut kit and it includes the needed vacuum "T"s. It's very important to have leak free hoses and connections on the supercharged 3.8. Now that they are old, the factory hoses often leak under boost causing incorrect pressure signals to reach the map sensor, fuel pressure regulator, and the supercharger's bypass solenoid and bypass actuator. If your supercharged 3.8 is a little low on power, or has higher than normal fuel consumption or emissions this kit will probably help.

each kit

Rated to 100 psi!

each kit

Rated to 100 psi!

each kit

Rated to 100 psi!

each kit

Rated to 100 psi!

each kit

Rated to 100 psi!

each kit

Rated to 100 psi!

each kit

     The 924s have more vacuum hose than any other 4 cylinder car I have worked on. Our kit has 55 feet of hose. It replaces every single vacuum hose under the hood as well as all those under the dash. It also replaces all the windshield washer hoses. If your 924 has a running problem or a problem with the heating or air conditioning controls, odds are good this kit will take care of it. The vacuum systems in the 924 are critical.

each kit

each kit

each kit

     This is by far the best and most complete 928 vacuum hose kit on the market. It has 43 feet of high quality silicone hose. Enough to replace all the vacuum lines under the hood of your car as well as all the lines for the windshield washer system and various small diameter coolant lines. A vacuum diagram is included. Note, there a few vendors selling 928 kits that have essentially copied our text to make their kits sound like ours. However these copy cat kits don't have nearly enough hose for the 928.

each kit

     This is by far the best and most complete 928 vacuum hose kit on the market. It has 43 feet of high quality silicone hose. Enough to replace all the vacuum lines under the hood of your car as well as all the lines for the windshield washer system and various small diameter coolant lines. A vacuum diagram is included. Note, there a few vendors selling 928 kits that have essentially copied our text to make their kits sound like ours. However these copy cat kits don't have nearly enough hose for the 928.

each kit

     Our Porsche 928 kits are the best and most complete on the market. If you have a 928 with K-Jetronic this is the kit for your. It has 46 feet of high quality silicone hose. Enough to replace all the vacuum lines under the hood of your car as well as all the lines for the windshield washer system and various small diameter coolant lines. A vacuum diagram is included. Note, there a few vendors selling 928 kits that have essentially copied our text to make their kits sound like ours. However these copy cat kits don't have nearly enough hose for the 928.     

each kit

Rated to 100 psi!

each kit kit

Rated to 100 psi!

each kit kit

each kit kit

     This kit replaces all the vacuum lines under the hood of you 944 Turbo/951. It also has enough hose to replace all the windshield washer hoses. All in all it has 43 feet of hose in 5 different sizes. About 40 feet of the hose is silicone. There are two non-silicone hoses included for some areas where silicone would not be desireable. There are many copy cat kits out there for the 951, don't be fooled.

each kit

     The pictures of this kit don't do it justice. This kit includes over 45 feet of hose! I took the photos before all the hoses were installed. It replaces all the vacuum lines associated with the fuel injection system, all the windshield washer lines and all the under hood vacuum lines associated with the Turbo as well as the heating and A.C. Systems. This includes all the lines outboard of the engine compartment above the wheel wells. You can see some of these in the lower photo. This kit is based on the early APC version as that variant seems to have the most hose.

each kit

[up]

     This kit includes over 45 feet of hose!   It replaces all the vacuum lines associated with the fuel injection system, all the windshield washer lines and all the under hood vacuum lines associated with the Turbo as well as the heating and A.C. Systems. This includes all the lines outboard of the engine compartment above the wheel wells. You can see some of these in the lower photo.

each kit

     These Scion kits replace all of the vacuum hoses associated with the engine as well as the radiator to overflow tank hose. If you buy this kit and later need to upgrade it to the after market kit, that's not a problem but it will cost $9.    The kit is pre-cut with step by step detailed installation instructions.

each kit

[up]

If your Scion has an after market air intake (any brand)  this kit will fit.  The kit is pre-cut with step by step detailed installation instructions.

This kit replaces all the vacuum lines under the hood except for one. It also replaces the radiator to coolant overflow tank hose. The engine pictured has a carbon fiber cover and an Injen Intake, neither of which are included.  The kit is pre-cut with step by step detailed installation instructions.

     This kit fits ALL WRXs including STIs from 2000-2007. The kit includes over 30 feet of hose in six sizes. It replaces every vacuum line under the hood, various small diameter coolant lines and all the windshield washer hoses. There are a few hoses we coudn't change for this picture because they are under the intercooler and intake manifold, but they are included in the kit. Note: the lighting for this picture wasn't too good, the hoses are a bright yellow and the car is yellow. For some reason our camera makes yellow look orange.

each kit

     Swapping out the 7M for a 1JZ or 2JZ is becoming a common swap. Our Mark IV TT kit will cover these swaps with ease.  You can save a little money by using one of the MKIII kits which may or may not have enough hose depending on just how you are setting everything up.

.This kit replaces all vacuum lines associated with the fuel injection as well as various small diameter coolant lines.  It comes in length with a hose cutter and installation instructions.

each kit

     You have to love the Supra MK II. This is car that brought Toyota into the performance world. Finally they had something to compete with the Z car. This kit replaces all vacuum lines associated with the fuel injection as well as various small diameter coolant lines. It comes in length with a hose cutter and installation instructions.

each kit

     The Toyota Celica ST hose kit replaces all the vacuum lines under the hood, as well as all the windshield washer hoses and various small diameter coolant lines. The kit includes over 35 feet of hose in four sizes. It comes in length with a hose cutter and installation instructions.

each kit

     The Toyota MR2 kit has over 36 feet of hose in four sizes. It replaces every single vacuum line under the hood, and in the forward trunk. It also replaces various small diameter coolant lines and all of the windshield washer hoses. This is a good kit, for a great car. This kit comes in length with a hose cutter, installation instructions and a vacuum diagram!

each kit

Note: The picture does not show the windshield washer lines installed. They are included!

each kit

    Wow, talk about a great but underrated car! The 7M-GTE is a great motor. This kit replaces all vacuum lines associated with the fuel injection as well as various small diameter coolant lines. This kit does includes a vacuum hose diagram.

each kit

Note:   the larger diameter red couplers are from a different source and not part of the vacuum hose kit. This kit includes a vacuum hose diagram.

each kit

This kit replaces all vacuum lines associated with the fuel injection as well as various small diameter coolant lines.  It comes in length with a hose cutter and installation instructions. This kit includes a vacuum hose diagram.

each kit

Important: the three largest hoses in the picture are not included in our kit. Those are from Samco. Note how closely our blue matches theirs. I guess they use the same blue dye.

each kit

     This kit is a lot more complete than what you see in the picture, but this gives a good idea of what's involved. The actual kit has larger hose for the brake booster and enough length so no sections of original hose need to be reused as in the picture. We will Pay Pal $20 to the first one to send us a picture we use that shows the whole kit installed.

each kit